ESteel Corporation
USED MACHINERY FOR SALE.


600mm x 3.2mm x Used Coil Continuous Galvanising Line (CGL Line) for Sale ES-030014

AA) Main Specification

1. Galvanizing Type : Continuous Pickling cum Non-oxidation Furnace Type.

2. Material Specification

1) Material : Hot Rolled low carbon steel (HR)
2) Yield Strength : 17§¸/§" to 30§¸/§"
Silicon content should not exceed 0.007%
3) Strip Thickness : 1.0mm (min) / 3.2mm (max)
4) Strip Width : 200mm (min) / 600mm (max)
5) Incoming coil data : Weigh : 15,000kgs (max)
Coil I.D : 508mm
Coil I.D : 2,000mm (max)
6) Out going coil data : Weigh : 15,000kgs (max)
Coil I.D : 508mm
Coil I.D : 2,000mm (max)
Type of coating : Zinc; Range : 100~400gm/§© [both sides]

3. Line Specification

1) Type : Continuous Pickling cum Non-oxidation Furnace Type
2) Line direction : From Right to left
3) Line Speed : Entry section : 80mpm (max) / 20mpm (min)
Exit section : 80mpm (max) / 20mpm (min)
Process section : 60mpm (max) / 20mpm (min)
4) Production capacity : 30Ton / hr. Based on reference size.
l.e : 2.0mm tick x 600mpm wide x 50mpm = 30Ton/hr
(720Ton/Day, 21,600Ton/Month, 259,200Ton/Year)
5) Max. Furnace Capacity : 30Ton/hr
6) Furnace Fuel : LNG
7) Threading speed : 15mpm

4. Line Process

Coil car(#1,2) => Uncoiler (#1,2) =>Pinch roll cum fine flattener(#1,2) => Auto welder => Entry horizontal accumulator => Burr masher => Prewasher => Pickling(#1,2) => Rinse(#1,2,3,4) => Hot air dryer => Galvanizing Furnace (Tunnel => Preheat section => Radiant tube section => SCH section => Jet cooling section
=> Exit section) => Zinc pot => Air knife => Cooling zone => Water cooling => X-ray thickness detector => Skin pass mill => chemical coater(chromate)(#1,2) => Hot air dryer => Exit horizontal accumulator => Edge guiding system => Recoiler => Coil car

5. Operators : 6 Peoples / shift

6. Machine Dimension : 150 Meter x 16 Meter

BB) Specification of Equipment

1. Coil car No.1 & 2
2. Uncoiler with brake roll No.1 & 2
3. Peeler table No.1 & 2
4. Pinch roll cum Five roll flattener with De-burning roll No.1 & 2
5. Entry gangway
6. Entry Shear (Double Decker type)
7. Pinch roll No.1 : Top roll dia. 600mm x 850L, Bottom roll dia. 200mm x 850L
8. Semi-Auto Welder
9. Bridle No.1, 2, 3, 4, 5
10. Deflector roll No.1, 2, 3, 4 & 5
11. Steering roll No.1
12. Entry accumulator
13. Steering roll No.2
14. Burr masher
15. Pre wash tank with squeeze roll and circulating tank
16. Pickling tank No.1 & 2
17. Four stage cascade rinse system with squeeze rolls
18. Edge wiper
19. Hot air dryer
20. Steering roll No.3
21. Tension meter : Tension meter with load cells shall be provided. Three ?rolls
22. Non-oxidizing Furnace
23. metallic Pot
24. Pot heating Furnace
25. Galvanizing Equipment
26. After Pot Cooler[APC Tower]
28. Deflector roll No.7 & 8
29. Deflector roll No.7 & 8
30. Quenching tank
31. Steering roll No.4
32. Deflector roll No.9
34. Skin Pass Mill
35. Chromic coater
36. Hot air Dryer No.2
37. Deflector roll No. 10,11 & 12
38. Exit accumulator
39. Deflector roll No.13 & 14
40. Bridle No.5
41. Exit Shear
42. Edge position control with Staggered Winding
44. Threading table
45. Recoiler
46. Belt wrapper
47. Exit coil car

 


Should you have any interests or questions please feel free to contact us!

Best Regards

Antonio Lee / Vice President

ESteel Corporation .

Tel. +82-31-407-1144

Fax +82-31-407-1157