Cid 3, 2° - E-28001 MADRID T: 91 576 56 0 magazine@metalspain.com

EMPLEO - METAL- HIRING

VACANTES - HIRING TESLA MEXICO

https://www.tesla.com/es_MX/careers

Test Engineer, Abuse Engineering, Semi

https://www.tesla.com/careers/search/job/test-engineer-abuse-engineering-semi-225369

VACANTES - HIRING TESLA WORLDWIDE

https://www.tesla.com/careers/search/?region=5&site=US&state=NV&location=Sparks

AIRBUS Querétaro busca personas para ocupar las posiciones de:
Ingeniero de Proceso (ensamble aeroespacial)
Supervisor de Producción (maquinados)
Ingeniero de Mantenimiento Industrial
Controllador de Producción (planeación de producción)
Ingeniero de Capacitación (experiencia obligatoria con helicópteros, control de exportación y regulaciones ITAR)

Requisitos: inglés fluido, SAP, tres años de experiencia en el puesto o similar.

Para postularte envía tu CV a: Jennifer.aguilar@airbus.com

Carlos Edmundo Feliciano

Empresa: Carrera Nissan de Araraquara : ver CV AQUI

SYPRIS TECHNOLOGIES, RASSINI, CIDESI, OTHEC TRUPER,THECSUR, CARTUTEK, DANFOSS, COMBULEX,
FORD, VW VOLSKWAGEN, ITP, GENERAL MOTORS, BMW GROUP, TOYOTA, HONDA, DAIMLER, GKN, BODYCOTE, MESSIER- SAFRAN, ARBOMEX, TREMEC TRANSMISSIONS, DANA GROUP, AAM, NITROGAS, TERNIUM, THYSSENKRUPP, FORJA DE MONTERREY, GM TOLUCA, FABRICA DE ARMAMIENTOS DE LA SECRETARIA DE LA DEFENSA NACIONAL, EATON TRANSMISSIONS, REGAL, ITR, ALAXIA, AERNNOVA, CIDETEC, UNAQ, IMT, HITCHINER, NEMAK, MARTINREA HONSEL, PROYEXTOS TECNICOS Y MECANICOS DE ACERO, Hirschvogel Components México, EJOT ATF, Tratamientos Térmicos Avanzados, TECNOLOGICO NACIONAL DE MÉXICO, BRASMEXA, ALTA TECNOLOGIA EN TRATAMIENTOS TERMICOS, INSTITUTO TECNOLÓGICO DE MORELIA, Temper de Guadalajara SA de CV, Tratamientos Ferrotermicos S.A.S., TERNIUM, ETSA, LAUAK, TERMPROCES, DANA, CIDESI, TTQ QUERETARO, MHISA, TRATAMIENTOS TERMICOS DE AGUACALIENTES, THYSSENKRUPP, Tubos de Acero de México, Grupo ABX, FUCASA S.A. de C.V., Brovedani Reme México, Grupo SMM, ACERLAN Matrix Metals, PCC Aero, SEDENA - Secretaría de la Defensa Nacional, etc. presents in past events

All info http://metalspain.com/mexico–HT.htm and info@metalspain.com

PWHT TECHNICIAN : edmarocana65@gmail.com read CV here

BOMBARDIER Querétaro busca persona para ocupar la posición de Ingeniero de Stress. Requisitos: Licenciatura o Maestría en Ingeniería de un centro educativo reconocido, Ingeniería Mecánica, Aeronáutica o afín. Mínimo cinco a ocho años en puestos de ingeniería enfocados al análisis estructural. Inglés avanzado.

Para postularte envía tu CV al correo a: lorenamaria.ramirez@aero.bombardier.com

- Soy fundidor desde mis 19 años de edad actualmente tengo 42 años. Soy de Ecuador me gustaría trabajar en su empresa , tengo experiencia en moldeo , colado y operar cubilote - mi contacto es +593 0990508105 mi nombre es César Gustavo Esmeraldas Napa
funesfar@outlook.com

We are looking for Production Supervisor for Heat Treatment Plant.
Qualification: Diploma
Experience: 4-6 Years in Heat Treatment industry (Knowledge in SQF, Gas nitrating Furnace will prefer)
Salary : As per Company Standards.
Job profile:
Knowledge in Heat treatment process like carburizing,
Carbo Nitriding, through hardening, Gas Nitriding & Nitro carburizing.
Daily production plan for SQF & Gas Nitriding furnace
Daily monitoring of production log book and process controls.
Daily monitoring and controlling of consumables.
Prepare monthly requirement for production consumables.
Interested can send your cv to hr.bangalore@unithermfurnaces.com
OR
WhatsApp : wa.me/919902774920
Walk-in directly to
Unitherm Engineers Ltd.
No 47E Jigani link road Bommasandra industrial area
Bangalore-560099
Thanks & Regards,
Mahesha M N –HR
Unitherm Engineers Ltd.
9902774920

I am 9 year experience in steel casting manufacturing company in melting production and quality related work and all standard chemical charge work& induction furnace smooth operation and safety following regular basis and document following work and melting costing &Time management activitie

See cv here

D. Jegan jeganmechsvp@gmail.com

Se busca empleo de supervisor de fundicion : con 34 anos de experiencia en aceros y hierro Moldeo verde autofraguante investment corazones fusion laboratorio quimico y de arenas no cel de contacto 6144692586 tengo disponibilidad - ver CV

SAFRAN Querétaro busca persona para ocupar la posición de Customer Support-Engine Owner. Requisitos: Experiencia en servicio al cliente, gestión de contratos y gestión de proyectos.

Para postularte envía tu CV a: reclutamiento.rh@safrangroup.com

Latécoère Querétaro, busca persona para ocupar las posición de Ingeniero de Campo de Cadena de Suministro. Requisitos: Inglés avanzado, uno a dos años de experiencia en puesto similar, manejo de SAP, experiencia en cadena de suministro, habilidades para negociar, control de stock.

Para postularte envía tu CV a: rhqro@latecoere.aero

metalspain.com/mexico-HT.htm

SAFRAN Querétaro busca personas para ocupar las posición de Operadores de Producción-Control NDT. Requisitos: Bachillerato concluido y/o TSU. Experiencia mayor a un año en la industria. Conocimiento de tratamientos de superficie y/o NDT. Disponibilidad para rolar turnos. Conocimiento en interpretación de planos y tolerancias geométricas. Liberación de material, tratamiento de no conformidades, inspección visual. Uso de instrumentos de medición.

Para postularte envía tu CV al correo a: gema.alcala@safrangroup.com

SAFRAN Querétaro busca persona para ocupar la posición de Ingeniero en Metrología. Requisitos: Ingeniería en metrología o experiencia afín. Inglés avanzado, francés deseable. Experiencia en Metrología Dimensional. 

Para postularte enviar CV a: daniela.sanchez@safrangroup.com

ITP Aero Querétaro busca persona para ocupar la posición de Líder de Personal y Capacitación. Contratación directa por la empresa, prestaciones superiores, vales de despensa, fondo de ahorro, seguro de vida. Sueldo Competitivo.

Para postularte envía tu CV a: alonso.villanueva@itpaero.com

AIRBUS Querétaro busca personas para ocupar las posiciones de: 
Ingeniero de Proceso (ensamble aeroespacial)
Supervisor de Producción (maquinados)
Ingeniero de Mantenimiento Industrial

Requisitos: inglés fluido, SAP, tres años de experiencia en el puesto o similar.

Para postularte envía tu CV a: Jennifer.aguilar@airbus.com

Latécoère Querétaro, busca persona para ocupar las posición de Ingeniero de Campo de Cadena de Suministro. Requisitos: Inglés avanzado, uno a dos años de experiencia en puesto similar, manejo de SAP, experiencia en cadena de suministro, habilidades para negociar, control de stock. 

Para postularte envía tu CV a: rhqro@latecoere.aero

GLOBAL THERMAL SOLUTIONS Sonora, busca persona para ocupar la posición de Ingeniero de Servicios. Requisitos: Ingeniería Mecatrónica o equivalente. Experiencia en metrología. Lectura de documentación en inglés. Disponibilidad para viajar 100% del tiempo. Licencia de manejo vigente.

Enlace original de la publicación: https://bit.ly/3sScFZq

Maquinas de Taller: fresadora, torno, rectificadora plana y cilíndrica, mandriladora, cepillo, soldadura, aplicación de pintura,  troqueles, moldes de inyección,  manejo de centros de maquinado verticales y horizontales (Stama, Traub, Sema, Loch, Porta, Posalux, Index, Kryle, Daewoo, Zaller, Droop,Milltronics,Cincinnati,Toshiba) Electroerocionadoras de corte por hilo Agie, mitsubishi, charmille, de penetración Belmont y agie, maquinas de impresión de prototipos rápidos en 3D.
Conocimiento de diseño y manufactura,  matricería (básica), conocimientos de lenguaje CNC (haindehein e ISO), interpretación de planos (sistema americano y europeo); sistemas básicos de calidad, control estadístico de procesos, simbologuia, tolerancias geométricas, ajuste de maquinaria y herramentales, mecanica, hidraulica y neumática básico.
Manejo de software: autocad, mechanical desktop (versiones 4, 5, 6) Unigraphics, solid Works, Solid edge,Visi (cad-cam), master cam, edge cam, power mill, power shape, cam to measure , geomagic, point master, office, Ingenieria en inversa.
Manejo de todo instrumento de medición (digital y analógico) aditamento especial para ajuste de herramentales soller, manejo y ajuste de sistema de medición pretec, sistema de medición de esfuerzos de corte (artis y normand alarm), sistema de digitalizado y escaneado faro, romero y  Atos.

Idiomas: Ingles 75% y Alemán 60%

ver cv aqui

sufridem@hotmail.com

TechOps MX, busca persona para ocupar la posición de Líder de Instalaciones. Requisitos: Ingeniero Mecánico, industrial o afín con título. Maestría deseable. Inglés avanzado conversacional. Conocimiento en AuotCAD, Solidworks, Excel (avanzado), NOM, ANSI, ASHREA, OSHA, etc. Mínimo cinco años en áreas GSE/FACILITIES.

Para postularte envía tu CV a maria.perusquia@techops.mx

Eliomar Jesús Gomes Guanipa

• Dirección: Jesus de Asin 785, PERU | Lima | Rimac 
• Teléfono: +51 917 035 778
• Correo electrónico: eliomarguanipa@gmail.com
• Carnet de Extranjería: 003971250

ver cv AQUI

DELASTEK Querétaro, busca persona para cubrir la posición de Ingeniero Aeronáutico. 

Requisitos: Inglés avanzado, entre tres y cinco años de experiencia en sector aeronáutico, experiencia en área de ingeniería, titulado en ingeniería aeronáutica. 

Para postularte envía tu CV a: rcastro@delastek.com

AIRBUS Querétaro, busca persona para ocupar las posición de Ingeniero de Calidad. Requisitos: más de tres años de experiencia en la misma posición o similar. Inglés fluido. Experiencia en empresas manufactureras y multiculturales. Experiencia con Core tools, QMS, GD&T, metodologías de solución de problemas y experiencia con Federación Internacional de Aeronáutica. SAP deseable y conocimiento básico en pruebas no destructivas y tratamientos térmicos.

Para postularte envía tu CV a: jennifer.aguilar@airbus.com

TechOps MX, busca persona para ocupar la posición de Especialista de ERP. Requisitos: Ingeniería en tecnologías de la información, Sistemas computacionales o afín. Certificaciones Power Bi y Microestrategy (deseable). Mínimo tres años de experiencia en puesto similar, experiencia en soporte a sistemas de control y desarrollo de softwares. Inglés intermedio-avanzado.

Para postularte envía tu CV a maria.perusquia@techops.mx

ITP Aero Querétaro busca persona para ocupar la posición de Ingenieria de Calidad. Requisitos: Ingeniería Aeronáutica, Industrial o afín. Inglés intermedio (hablado, escrito y comprensión). Metodología de solución de problemas, Ejecución de auditorías de sistema, proceso y cliente.

Para postularte envía tu CV a: alonso.villanueva@itpaero.com

Para postularte envía tu CV a: jennifer.aguilar@airbus.com

Para postularte envía tu CV a: jennifer.aguilar@airbus.com

Para postularte envía tu CV a: rhqro@latecoere.aero

MEXICO FOUNDRY CONGRESS http://metalspain.com/FUNDICIONmexico-foundry.htm

Para postularte envía tu CV a: reclutamiento@techops.mx

ITP Aero Querétaro busca persona para ocupar la posición de Ingenier@ de Mantenimiento. Requisitos: Cinco años como técnico de mantenimiento en empresas aeronáuticas, automotrices, metalmecánicas o similares. Ingeniería o TSU en mantenimiento, electromecánica. Mantenimiento Industrial, electricidad, mecánica, neumática, hidráulica, electrónica, CNC,'s PLC's, Lectura e interpretación de diagramas eléctricos, electrónicos, neumáticos, hidráulicos y mecánicos. Manejo de softwares para la gestión del mantenimiento preventivo (MP, SAAP, Office, etc.). Conocimiento de normas de seguridad y manejo de equipos auxiliares, plataforma, montacargas, grúa, etc.

Para postularte envía tu CV a: alonso.villanueva@itpaero.com

TechOps Querétaro busca persona para cubrir la posición de Inspector de Control de Calidad. Requerimientos: Licenciatura o TSU en Mantenimiento Aeronáutico, dos años de experiencia como técnico en aviación, dos años desempeñando puesto de Inspector de Calidad en MRO, Inglés básico-intermedio, Licencia en motores y planeadores vigente, conocimientos en sistemas de aviación (controles de vuelo, tren te aterrizaje, etc.).

Para postularte envía tu CV a: maria.ruiz@techops.mx

ITP Aero Querétaro busca persona para ocupar la posición de Inspector de Calidad. Requisitos: Conservar y mantener los instrumentos de medición y asegurar que estos estén dentro del periodo de calibración. Identificar y mantener la trazabilidad del producto. Mantener el área limpia y ordenada cumpliendo estándar de 5's. Enseñar a operadores a encontrar defectos. Revisión de Fairs. Llenado de documentación de Proceso. Inspeccionar las piezas de acuerdo a instructivos de inspección, cumpliendo tiempo requerido.

Para postularte envía tu CV a: alonso.villanueva@itpaero.com

TechOps Querétaro busca persona para ocupar la posición de Sheetmetal.

Requisitos: Licencia DGAC Laministería y Recubrimiento de Aeronaves, examen médico vigente, experiencia de dos años. Inglés intermedio-avanzado.

Para postularte envía tu correo a reclutamiento@techops.mx

Universidad Aeronáutica en Querétaro busca persona para ocupar la posición de Profesor en Administración del la Producción. Requisitos: Inglés intermedio-avanzado. Dominio de estadística, SPC, CoreTools, MiniMap, seguridad industrial, Programación CAM en SIEMENS, FANUC, MasterCAM, Fusion360, dominio de administración de procesos de producción, ingeniería industrial, operaciones y control de procesos, disponibilidad de horario y residencia en Querétaro. Licenciatura | Maestría Metalmecánica, manufactura o producción.

Para postularte envía tu CV a: reclutamiento.unaq@unaq.mx

Universidad Aeronáutica en Querétaro busca persona para ocupar la posición de Profesor en Aerodinámica. Requisitos: tres años en docencia a nivel superior o en la industria aeronáutica, Inglés avanzado comprobable. CAD: Solidworks, CATIA, Dinámica de Fluidos computacional, Solidworks Flow Simulation, ANSYS Fluent. Dinámica de fluidos experimental, diseño y manejo de proyectos de investigación y desarrollo tecnológico, disponibilidad de horario y residencia en Querétaro. Vocación docente. Maestría en Ciencias (MSc) Dinámica de Fluidos | Turbulencia.

Para postularte envía tu CV a: reclutamiento.unaq@unaq.mx

Universidad Aeronáutica en Querétaro busca persona para ocupar la posición de Profesor en Física. Requisitos: un año en docencia en física y proyectos de investigación. Inglés intermedio - avanzado. Desarrollo de contenidos digitales para la enseñanza, conocimiento de edición de textos Latex, manejo de software para aplicaciones en matemáticas y física (deseable), disponibilidad de horario y residencia en Querétaro. Vocación docente. Licenciatura | Maestría en Física.

Para postularte envía tu CV a: reclutamiento.unaq@unaq.mx

Universidad Aeronáutica en Querétaro busca persona para ocupar la posición de Profesor en el Área de Manufactura. Requisitos: dos años en docencia a nivel superior en materias de manufactura aeronática y/o de la industria aeroespacial. Inglés intermedio - avanzado. Manejo de GD&T's, torno y fresadora convencional y máquina CNC. Programación en CAM Siemens, FANUC, MasterCAM, Fusion 360, Interpretación de planos, disponibilidad de horario y residencia en Querétaro. Vocación docente. Licenciatura | Maestría en metalmecánica, manufactura o maquinados de precisión.

Para postularte envía tu CV a: reclutamiento.unaq@unaq.mx

Universidad Aeronáutica en Querétaro busca persona para ocupar la posición de Profesor en el Área de Materiales. Requisitos: un año en docencia en materiales, tutorías y/o proyectos de investigación. Inglés intermedio - avanzado. Dominio de conceptos relacionado con diagramas de fases de materiales, conocimiento en procesos de fundición, y procesos de manufactura en materiales compuestos. Disponibilidad de horario y residencia en Querétaro. Vocación docente. Licenciatura, preferentemente Maestría en área de materiales, metalurgia, ciencia de los materiales.

Para postularte envía tu CV a: reclutamiento.unaq@unaq.mx

Universidad Aeronáutica en Querétaro busca persona para ocupar la posición de Profesor en el Área de Procesos Especiales. Requisitos: dos años en docencia a nivel superior en materiales de manufactura aeronáutica y/o de la industria aeroespacial. Inglés intermedio - avanzado. Manejo de NADCAP e interpretación de planos, conocimiento en procesos especiales, tratamientos químicos, electroquímicos, materiales compuestos y soldadura. Disponibilidad de horario y residencia en Querétaro. Vocación docente. Licenciatura | Maestría en metalmecánica, manufactura o procesos especiales.

Para postularte envía tu CV a: reclutamiento.unaq@unaq.mx

ITP Aero Querétaro busca persona para ocupar la posición de Operador de Mecanizado. Requisitos: Manejo de centros de maquinado y tornos de control numérico HAAS. Conocimientos de programación básica, Conocimiento de carga de offsets de herramienta y de pieza. Manejo de centros de maquinado y tornos de control numérico. Solución de operaciones matemáticas básicas y conversiones.

Para postularte envía tu CV a: alonso.villanueva@itpaero.com

ALBANY Querétaro busca personas para ocupar la posición de Analista de Almacén y Recibo. Requisitos: Carrera terminada. Inglés fluido. Tres a cinco años de experiencia en puesto similar. Conocimiento en Lean Manuafcturing y Sistemas de Calidad. Experiencia en FIFO y SAP. Emprendedor con excelentes habilidades organizativas y sentido de urgencia. Trabajo en Equipo. Posibilidad de rolar turnos.

Para postularte envía tu CV a: jessica.celada@albint.com

ITP AERO Querétaro busca persona para ocupar la posición de Practicante de Recursos Humanos. Requisitos: Ingeniería o Licenciatura Económico-Administrativa. Inglés intermedio. Excel avanzado. Comunicación efectiva. Gestión, manejo y desarrollo de equipos de trabajo. Administración y manejo de documentación.

Para postularte envía tu CV a: andrea.trejo@itpaero.com

ITP AERO Querétaro busca persona para ocupar las posiciones Practicante en las áreas de: Ingeniería de Manufactura, Calidad, Ingeniería de Diseño, Atracción de Talento, Nóminas, Atención al Personal, Compras y Comercio. Requisitos: Estudiantes afines al área de su interés: Ingeniería Mecánica, Aeronáutica, Industrial, Administración. Interés por el sector aeronáutico. Disponibilidad de 5 a 7 horas diarias de lunes a viernes.

Para postularte ingresa al siguiente enlace: https://bit.ly/3JnCE1i

AEROH Querétaro busca persona para ocupar la posición de Analista de Costos. Requisitos: Conocimiento en activos fijos, inventarios, control de gastos, Excel avanzado, inglés avanzado. Dos años en puestos similares.

Para postularte envía tu CV a: mitzi.vazquez@outhelping.com.mx

OutHelping Querétaro busca personas para ocupar las posiciones de Operador CNC, Utillero, Herramentista, Almacenista, Expeditor. Requisitos: Experiencia en Centros de Maquinados. Interpretación de planos. Instrumentos de medición. Uso de torno y fresa. Secundaria o bachillerato terminado. Inventarios. Excel básico. Grúa viajera. Dos años de experiencia con montacargas.

Para postularte comunícate al Whatsapp 442 445 14 37

OutHelping Querétaro busca personas para ocupar la posición de Líder de Proyectos. Requisitos: Ingeniería o Licenciatura, con más de cinco años de experiencia. Inglés avanzado conversacional (indispensable). Proceso de validación de presupuesto (CAPEX o afín). Experiencia en recepción, instalación de maquinaria. Creación y seguimiento de órdenes de compra. Conocimiento en maquinado y/o procesos especiales. Manejo de MS Project. Conocimiento y manejo de Software de diseño.

Para postularte envía tu CV a: elena.lucio@outhelping.com.mx

SAFRAN Querétaro busca persona para ocupar la posición de Analista de Datos N3. Requisitos: Ingenieria en sistemas computacionales o afin. Tres años de experiencia en análisis de datos y/o desarrollo de software. Conocimiento y experiencia en lenguajes de programación Python (Matplotlib, Pandas, Numpy, tensorflow, keras, etc.). Conocimiento y experiencia en programación de WEB (Flask, DJango, Java, etc.). Conocimiento y experiencia en BI (Power BI y Excel). Conocimiento y experiencia en T-SQL (Store procedures, Triggers, cursores, indices). Manejo de bases de datos SQL y NoSQL (DDL y DML). Batch script.

Para postularte envía tu CV a: reclutamiento.rh@safrangroup.com

AMERICAN INDUSTRIES Querétaro busca persona para ocupar la posición de Almacenista Bilingüe. Requisitos: Inglés conversacional y escrito. Buena comunicación oral y escrita. Aptitud matemática. Organización. trabajo en equipo. Buen manejo de estrés y de interactuarn con otros.

Para postularte envía tu CV a: aperez@aiig.com

Estamos buscando un equipo profesional con experiencia en la Fundición de acero martensiticos , para la industria de las turbinas y mercado hydro .

Necesitamos :

-> Hornero
-> Moldeador
-> Ingeniero, con experiencia Metalurgica / simulador / Procedimentacion, alimentacion, enfriaminto y sepa diseñar los procedimientos en acero martensitico turbinas o similares.

Antía Neira
C/POLICARPO SANZ 6,5º A-B | 36202 | VIGO | PONTEVEDRA
Tlf: +34 672236030 antia@weemetal.com

m.cos@dvconsulting.com.mx

Thank you for your time and consideration.you can watch my actual video in my foundry work in korea to my linkedint account “agerico aquino” or in my facebook account “ajer aquino” thank you and godbless CV

BMW Group Plant San Luis Potosi is currently looking for "Production Supervisor Body Shop (Metal Finish)", if you are interested on this position, please apply here: https://lnkd.in/eak84u2

Se solicita Especialista de Mejora Continua, para planta Aeroespacial en Roca Fuerte, interesados enviar CV en ingles al correo gustavo.figueroa@tetakawi.com con el nombre de la vacante en el asunto.

Envia tu CV a iselamaldonado@nutec.com

Industria Aeroespacial solicita: INGENIERO DE MANUFACTURA - Exp. indispensable en Industria Aeroespacial - 3 a 5 años de experiencia como Ingeniero de Manufactura - Experiencia en metodología de Ingeniería de Calidad LEAN y SIX SIGMA - Bilingüe inglés - español - Disponibilidad para radicar en Guaymas, Sonora Interesados enviar CV a claudia.castillo@tetakawi.com

En BMW Planta San Luis Potosí, estamos en búsqueda de candidatos potenciales para nuestras vacantes como "SQA / SQE" para diferentes commodities. Si estás interesad@ y cumples los requisitos envíame un mensaje. Así mismo puedes revisar las vacantes en la siguiente liga y realizar la aplicación correspondiente

https://www.bmwgroup.jobs/content/bmw-group-websites/career_com/mx/en.html#location=MX,MX/SanLuisPotosi-SanLuisPotosi

BOSCH en QUERETARO info

Texas Stress is hiring heat treat technicians and helpers for local work in the Beaumont/ Port Arthur area. Call me @ 409-460-4177, email Jerimy@texasstress.com or visit texasstress.com to apply.

Por intermedio del presente adjunto curriculum vitae para ser consultado como TÉCNICO METALÚRGICO .
Estoy en la búsqueda laboral dado que se termino el proyecto en la Central Nuclear Embalse Córdoba Argentina donde me desempeñe como Metalógrafo.
Le hago una pequeña reseña de mi experiencia para que la puedan evaluar y poder dar una respuesta si puedo ser un integrante mas del equipo de trabajo ya que me interesa seguir trabajando en Energía .
Mi experiencia laboral esta adquirida en empresas Metalmecanicas , Energía y Metalúrgicas realizando las tareas de Programador de Producción , siendo el nexo coordinante de la distintas áreas ( Ventas ,Administración, Producción ,Compras, Despacho) manteniendo un contacto fluido y de gran interacción entre los sectores, lo ultimo fue como Metalógrafo de campo y Montaje de los canales ( feeders -header ) de la CNE.
Poseo gran experiencia en manejo de personal , capacitándolo si fuera necesario Aceros inoxidables , Aceros al Manganeso , Aleaciones especiales base Niquel o Cobalto, control de producción y procesos productivos , carga horaria de maquinas ,control de tiempos y métodos ,activación de trabajos tercerizado ,Ingeniería de procesos, mecanizado de piezas , conocimiento de las diversas Aleaciones y sus Normas ,interpretación de planos , manejo de ordenes de compra y producción , diseño de hojas de ruta, también los procesos de calidad certificada ISO 9000/2001, ISO/TS 16949 para industria automotriz.
Industria automotriz , fundición de matrices y porta matrices para las plantas automotrices , pinzas robots , todo tipo de accesorio
Algunas de las automotrices son SCANIA , FORD, RENAULT, TOYOTA y para el agro JOHN DEERE.
También poseo experiencia en análisis de costos, activación y control de materias primas ,atendiendo y mejorando las demandas de los distintos sectores de producción, también en la selección de proveedores y atención de clientes.
Poseo amplios conocimientos en la fabricación de piezas en aleaciones ferrosas y no ferrosas, aceros Inoxidables , refractarios, sus distintas aleaciones, tratamientos a los cuales se los somete ( laminado, deformación frio , caliente , extruido, soldadura ), y los distintos controles (ultra sonido , tintas penetrantes control de dureza, ensayos destructivos y no destructivos,(tracción, charpy) análisis químico y metalográfico), Normas de Calidad ( ASTM , API , EAQF) .
También poseo experiencia en los distintos Tratamientos Térmicos a los cuales son sometidas las piezas tales como ( recocido, temple , revenido, ) y sus distintos controles de calidad durezas y metalografías.
CV aqui
Desde ya muchas gracias.

Farher Jorge Alberto
Tecnico Metalurgico
DNI 16126008 jfarher@hotmail.com

Are you looking for a career where you:
- Get hands-on training and shadowing?
- Have the ability to travel? (internationally, too)
- Get to enjoy a holiday shutdown and other benefits like medical, dental, vision and more

?

kcrouthamel@unitedemployment.com

MANNESAMNN en El Salto, Jal, busca Ing. Metalúrgico para la posición de Ingeniero de Procesos Sr. Requisitos: Edad 30-45, experiencia mínima de 3 años en puesto similar, Inglés intermedio-avanzado, Core tools, CQI-9, 8Ds. Si cumples los requisitos, envía CV al correo minerva.arellano@mannesmann.com

Contact Kasey Crouthamel for more details! 610-437-5040 kcrouthamel@unitedemployment.com

Consider joining our family business, where you are more than just a number. Wire-Mesh Products is hiring! Learn more and apply online here http://bit.ly/2Nuefyy

SE BUSCA

Técnico de servicio – España

clevigueloux@mecanumeric.com

detalles puesto

PRECISAMOS TECNICO SAT DE MAQUINA HERRAMIENTA

C/ Isidre Nonell, 5 - Pol. Ind. Can Ribò
08911 Badalona – Barcelona
Tel. 934640178 - Fax. 933894648   PORT. 696915988
alfred@mpe.es    www.mpe.es

reclutamiento@tubacero.com

SE BUSCA

profesional hispano parlante con mucha experiencia en fundición de piezas pequeñas (de 5 a 40 kg) en aleaciones de acero al cromo, martensítico-austenítico,que serán sometidas principalmente a desgaste y que requieren muy buen acabado superficial.

Enviar CV a pablo@metalspain.com

Contacto : mariadelrefugio.perez@mx.bosch.com

Importante industria manufacturera solicita #PLANNER con experiencia e inglés. Interesados enviar CV a livier.gonzalez@mtk.com.mx

Contacto : elena.Villegas@magna.com

CV entero aqui

contacto : francisco.agonzalez.p@gmail.com

contact Job@Ipsen.de

http://www.simpsongroup.com/company/careers/sales-engineer

http://www.simpsongroup.com/company/careers/sales-engineer

I am undergraduate student in Materials and Metallurgy engineering finished my studies. I am looking for opportunities as a inspection engineer and quality assurance coordinator or it can be R&D assistant these are the jobs that suits me best as per my profile.

kumarsaaransh9@gmail.com

download CV

Buscamos especialistas con mínimo 8 años de experiencia para la construcción y puesta en marcha del Proyecto Ternium Pesquería. #CercaParaLlegarLejos

Envía tu CV: https://careers.techint.com/Ternium/

Buscamos especialistas con mínimo 8 años de experiencia para la construcción y puesta en marcha del Proyecto Ternium Pesquería. #CercaParaLlegarLejos

Envía tu CV: https://careers.techint.com/Ternium/

contacto : privera@ta42.com

contacto : a.marques@felino.pt

SACHIN JAIN

B.TECH.(METALLURGY)
E-mail: sachineeraj@rediffmail.com, sachineeraj@gmail.com
Phone No: 0141-2397288, 09923569970, 9765408682
Objective:
To take up new challenges in the global market of Quality / engineering / R&D / manufacturing by utilizing my strengths of analysis /problem solving / innovation for the betterment of the engineering industry while still honing my own abilities further.

KEY SKILLS:Competent in:                                                               
                                    -
-      Heat treatment (Carburising, Carbontiriding, Hardening, Tempering, etc.)                     
-      Microstructure examination

• Hardness check, BHN, HRB, HRC (ferrous).
• Shotpeening, Shot Blasting 
• Induction Softening,
• Magnetic Particle Inspection
• T.S. 16949                                   

-      5-S. Kaizen, Poka Yoke

• Calibration of the above equipment.

See CV here

I am writing to outline my extensive experience and successful track record as a Site Engineer. I believe I possess the skills, qualifications and vital experience necessary to make a very significant contribution to your organization.

I am a competent and results-oriented professional with over 5 years of experience in Site Engineering and Construction Management activities combined with strong skills and abilities to operate as the lead point of contact for any on site mobilization activities specific to the projects. Over the years, I gained experience in handling various activities for the projects, including infrastructure works, excavation works, shoring wall works, pilling with the S/C, approving shop drawings, and other civil works while ensuring project completion within time and cost constraints.

Additionally, I have expertise in range of accounting areas, including:
- On-Site engineering activities
- Budgeting, and requirement analysis
- Supervision and inspection of final works
- Timely delivery of material for uninterrupted work progress
- Ensuring work progress as per project and client requirement
- MEP and civil works
- Reporting and documentation

My strong communication skills, both written and verbal, and inter personal skills allow me to communicate effectively in the organization by analyzing effectiveness of projects and giving recommendations for improvement. I am always keen in overseeing the bigger picture while developing my strategies. I also have a forward thinking and analytical approach while bringing forward my plans. Further, I have strong leadership skills combined with having a team player attitude, which helps me to thrive in a creative and dynamic environment.

Further details of my experience and achievements can be obtained from my CV (attached).

I would welcome the opportunity to discuss the job vacancy. I can be contacted on my mobile or via e-mail (for details kindly refer to the top of this letter).

Yours faithfully,

Attia Mohammed Abouobied
Contact No: 0559634663 | Email ID:attiamohammed1991@gmail.com
Nationality: Palestinian | Driving License: UAE Driving License

I am a graduate (7.43GPA, B. Tech in Electrical & Electronics Engineering) from Viswajyothi college of Engineering & Technology (Mahatma Gandhi University, Kerala, india). As my resume indicates, I possess nearly 2 years of experience in the HVAC field as a Project Engineer at VK Building Services. I believe I possess the necessary skills and experience you are seeking and would make a valuable addition to your company.

As a Project Engineer, my responsibilities included site supervision, commissioning, documentation of HVAC works. I assisted in the successful completion of NETAPP Campus, Bangalore.

I have attached my resume for your kind review and I look forward to speaking with you further regarding your available position.

Sincerely,

Stanly Jones
United Arab Emirates
Mob: 0555459160
skaredan@gmail.com

Civil Engineer

I've got the B.Sc. degree in Civil Engineering from Jordan University of Science and Technology - Jordan in "2011".

I am currently a Senior Project Engineer at "JABCO". The enclosed CV demonstrates my experiences in overseeing a range of civil engineering projects.

I have strong ability to work under pressure in a fast-growing environment and to work independently on projects of various scales.

I'm looking for a new oppοrtunity with a professional and well-established institution, so I can apply and improve my experience.

Thank you so much for considering my request. If you need to reach me, please feel fr?e to contact me.

Regards,

Laith Kilani

Mob : 00971555689381

Skype ID: laith.kilanee

Email: laith8939@gmail.com

This is Unnikrishnan Pillai here. I am seeking new challenges in Manufacturing /Operations/ Sales/ Customer Service industry. I would like to submit my application for any related position in your esteemed company.

I am highly technical and knowledgeable production Supervisor, has excellent leadership and management skills. I Possess good conceptual abilities and understand design principles. I am CNC Certified professional along with 5 years’ experience as Production Supervisor.

In addition to my extensive Manufacturing industry experience, I have strong communication, customer service, office assistance and administrative skills.

Thank you for your consideration. Looking forward for a positive response.

Yours faithfully,

Unnikrishnan Pillai
Contact: +971 529904301 unnipillai33@gmail.com

I am Supply Chain | Logistics | Procurement | Warehouse Professional (MBA in SCM & Finance) with more than 7 years of diversified experience in various industries.

1- Logistics operations in terms of commodities and Handling:
· Normal Cargo: Import FMCG
· Import and Export of Construction Materials as well as Medical Equipments, DG and Non DG Goods.
· Perishable Goods: Import, Export Vegetables, Fruits
· Medical: Medicines, Medical devices and related spare parts/consumables.
· Healthcare: all Hospital and Health Care Related Equipments for Hospitals
· Freight Forwarders.
· Customs Clearance.

2- Procurement activities

· Supplier selections and sourcing
· Design Policies and Procedures
· Demand Planning System
· Order cycle management
· Purchasing
· Cost benefit analysis

3- Inventory & Warehouse Management System

4- Managing and Leading Supply Chain Operations:

· Strategic Business Planning
· Negotiation skills
· Procurement Management
· Warehouse Management.
· Purchasing and demand planning/forecasting based on consumption / data analysis.
· Inventory Control Management.
· Distribution and Transportation.
· Business Process Re-engineering
· Vendor Management
· Financial Management Policy

5- IT Skills:

· MS Office and Excel Data Analysis.
· Networking
· Outlook
· SAP Knowledge
· Six Sigma Training
· SPSS Research and data Analysis
· Microsoft Dynamics GP.
· VAT Training

Enclosed is my CV that includes the above achievements and outlines several others that will be of interest to you. I would appreciate the opportunity to discuss your requirements further, and to establish my skills as a match for them.
Please feel free to call me at my mobile number or email me, I look forward to our meeting.
Thank you for your time and consideration.
Best regards,

Sandeep Kumar
+971525190319

I am applying in your well reputed and highly Prestige Company for the post which is mentioned above in the subject. I have a degree of BE Electrical Engineering with a vast working experience. Along this highly organized, laborious and well qualified profile synopsis I have also a Diploma of Associate Engineering (Electrical).

I am a well organized person, with excellent knowledge about the subject, able to do multitasking, able to handle a team and have excellent communication skills. As an Electrical Engineer I can handle the responsibilities and challenges of the post which I am applying for, to its fullest.

Please find my detailed resume which is attached with this letter.

I assure you that if selected; I will not let you down and would prove to be an asset for your prestige industry.

Sincerely,

Abdul Haseeb Hussain Malik
Dubai U.A.E
Mobile No: +971509753932 ahasseebhussain@gmail.com

I am writing to apply for the laboratory and quality control chemist in your concern. I hold a bachelors degree in chemistry with more than 10 years’ experience in chemical and cement industries working directly in the lab.

In my current position as laboratory and qc manager with standard chemicals I develop conducting experiment and maintain laboratory safety and document findings.

I am through in my record keeping and pay great attention to detail traits that are essential in this field. In addition, I am absolutely comfortable in a lab and always adhere to safe handling procedures and maintain sanitation protocol.

I am certain that you will find me outstanding candidate for the position and look forward to meeting, with you to further discuss my qualifications. Please contact me at the phone number or email address listed above to setup a person meeting.

Thank you in advance for your time and consideration.

Sincerely

L.Maria Agnes Leyonie,.
Mob: UAE +971 52 4126023 antonleo2008@gmail.com

Búsqueda de un Gerente de Logística para importante corporativo en CDMX de la industria automotriz.
Buscamos excelente experiencia en industria automotriz preferentemente en OEM. Interesados mramirez@prodensa.com.mx

Urgent Vacancy: Sr. Manager/AGM/DGM- Metallurgy & Heat Treatment:  Qulification: B.Tech/B.E. In Metallurgy, Experience- 15 to 18 Years, Location  Near Delhi, Desired:  Indepth knowledge in heat treatment process and must have knowledge in SQF and exposure of automobile industries , Ensure calibration of instruments of HT and metallurgical equipments, through external agency. Pl Email your CV in MS word (docx file) to virago.meta@gmail.com . Thanks & Regards, Vidyanand Galphade 

DOMINGO CARO MORENO - Responsable planificación y producción en SIDERURGICA BALBOA SA- domingocaromoreno@yahoo.es CV aqui

Worked as engineer in TCE JAMSHEDPUR Thiyagarajan thiyagu.rajan258@gmail.com CV

Raynal Reyes raynelreyes6@gmail.com Heat Treatment Technician (L-II)-Field Superviser - cv download

Elvis NUNEZ : TÉCNICO EN PWHT ELVISpwht@hotmail.com CV download

William Francisco Díaz Maldonado Heat Treatment Technician (L-II) wdiazmaldonado@gmail.com cv download

Argenis Lopez de profesion ingeniero mecanico, tecnico nivel II en tratamiento termico post soldadura argenis_lopez_20@hotmail.com CV download

?  Giro: Trading and Investment
?  Nombre completo de la empresa: Mitsubishi de Mexico S.A. de C.V.
?  Encargado de reclutamiento: Angel Ramirez
?  E-Mail: angel.ramirez@mitsubishicorp.com 
SOLICITUD DE PERSONAL
?Área de trabajo: Gerente o Jefe de General Affairs
?Lugar donde se ofrece la vacante: Ciudad de Mexico
?Perfil de la vacante (sueldo mensual neto, prestaciones, habilidades de idioma, títulos requeridos, etc.):
Work experience in General Affairs is necessary. Having know-how for immigration process, management of office and company cars. Administration of fix assets and equipment. Communication ability for Spanish, English and Japanese(Option) Ability for making internal regulation. Skill for Word/Excel/Power Point.

2. Fecha de publicación: 30/01/2017

DATOS DE LA EMPRESA
?  Giro: Asegurador
?  Nombre completo de la empresa: Tokio Marine Compañía de Seguros
?  Encargado de reclutamiento: Alma Trujillo Ramirez
?  E-Mail: alma_trujillo@tokiomarine.com.mx 
SOLICITUD DE PERSONAL
?Área de trabajo: Ejecutivo de Cuenta para Negocio Japonés
?Lugar donde se ofrece la vacante: Querétaro
?Perfil de la vacante (sueldo mensual neto, prestaciones, habilidades de idioma, títulos requeridos, etc.):
Edad: 27 a 35 años. Principales Actividades:-Realizar cotizaciones -Brindar atención y servicio a los clientes -Llevar a cabo el control de renovaciones -Elaborar cálculos de endosos. Habilidades: -Excelente capacidad de Servicio a clientes -Proactivo -Facilidad de palabra -Español e inglés Sueldo Bruto: $20,000.00 Prestaciones superiores a las de Ley

Eu Hildegardo Lopes, tenho 38 anos de idade, trabalhei em uma fundição de grande porte na cidade de Contagem/MG/Brasil quase 18 anos atuando em cargos de Ajudante de Produção, Auxiliar Técnico de Produção, Supervisor Técnico de Fusão e Supervisor de Produção, sou Técnico de Fundição/metalurgia, Engenheiro de Produção e Pós graduado em engenharia de Recursos minerais pela UFMG. Atualmente estou desempregado em busca de novas oportunidades no mercado. Tenho disponibilidade de trabalhar e morar na Espanha. Se porventura tiver alguma empresa de fundição na Espanha que esteja contratando e puder me indicar, ficarei eternamente grato. CV

Desde já agradeço total apoio e dedicação,

Atenciosamente,

Hildegardo

hildegardolopes@yahoo.com.br

BUSCAMOS
Gerente de Producción
Ing Mecanico o Electricista - Experiencia comprobable
Edad 40-50 años
Interesados mandar su CV r.humanos@emesa-perk.com.mx
7221992465 - 7221994551

We are a leader Industrial Furnace manufacturing based in India.
We are looking for the someone who can help us to develop new market in India as well as in Europe & UAE.
In which concern we both can move ahead. Please let us know the same in details.
regards

Gurunath H Ganabawale.

Heat Shield Technologies
Off: No. 16, Sai Nagar, Near Sadguru Complex,
P.B. Highway, Uchgaon,
Kolhapur-416005. (Maharashtra), India
Ph: +91-9326092193, 9423857138.

Works: Plot No A-50, Five Star MIDC,
Kagal Hatkangale, Kagal,
Kolhapur- 416216 (Maharashtra), India
Ph: +91-9326092193, 9423857138.

ACADEMIC QUALIFICATION:

• TYBCOM from Mumbai University (2008-2010).
• HSC from Mumbai University 2007.
• SSC from Sardar Vallabhbhai Patel High School Mumbai, Maharashtra in 2005.

  CV

• Neelam Behal
  
  Email address: neelambehal@yahoo.com

Abraham Palaty, Mechanical Engineer with Master’s degree and 5 years of experience seeking mechanical engineering jobs as an Individual contributor or as a lead/ manager. I am currently in U.A.E on a visit visa (valid till 2nd Nov, 2015) and am looking for a job in Mechanical Engineering.

I have experience using various design (Solid works, Unigraphics, Pro Engineer) and analysis CAD packages (ANSYS, CFD ACE, ProCAST). I am good at MS Office and have been using them to a great extent. I understand the value and importance of performing hand calculations and I enjoy it to a great extent.

Of the +5 years of my professional experience, I have spent 4 years working for Applied Materials Inc. as a Lead Mechanical Engineer based in Bangalore. During this tenure, I involved myself in product development activities, addressing field failure and engineering change management activities with continuous interactions with counterparts in California, Texas, Korea, Singapore, China and Japan. I was known to be good at design, hand calculations, and analysis. I was part of a team based in California (U.S.A) which developed a high throughput solar cell manufacturing equipment. I also have 3 patents on product development and manufacturing process change.

CV

Abraham Palaty
+971 56 1052421
abraham.palaty@gmail.com

I am Rekha Gahalot and I started my career in 1998 with Nippon Koei Co. Ltd. having Head Office at Tokyo and since 2002 I am in Casting Marketing (both Domestic and International level) and I am looking for the better prospects with more responsibilities. My other areas of interest includes Projects, Planning, Procurement, Administration. CV

I, Ms. Priyanka More, would like to apply in your esteemed organization for the post of software test engineer or any suitable positon related to Software/Hardware/Networking based on the availability

I have been working on manual testing for the last 4 years and have developed a rich experience with an Information Technology background. I’m a good learner so can be made flexible for any of the technical role CV

I have 26 months experience in Sales and service of Shot Blasting Machines. CV

Sunil N Patel

09737808244
Ahmadabad , Gujarat , India

Store keeper in UAE CV

SARON AMMAT
Dubai, UAE
Call: 0527301239
Oman: +968 97722897
Email: saronammat@gmail.com

Please find the resume attached for the position of Structural Steel Detailer/ Civil Engineer. I'm particularly interested in this position, which relates strongly to my over 13 years of experience in Steel & Civil Construction, Detailing & Estimation, Drawing Checking, Fabrication & Erection assistance & MEP. CV

THRIDEESH KUMAR K.

QA/QC Engineer or Mechanical Engineer

I’m 23 years old, BTECH graduate having 1 year experience as QA/QC Mechanical Engineer in Reliance Petrochemical Industries (Oil and Gas Construction Field) Jamnagar on contract basis, having Certified Welding Inspector [CSWIP 3.1], ISO 9001:2008 LEAD AUDITOR, Level II NDT for UT, Level II NDT for RT, Level II NDT for DPT, Level II NDT for MPI, AUTOCAD 2D+3D, ANSYS, CATIA, PRIMAVERA.

ALEN MATHEW alenmathew91@gmail.com CV

J Solomon Satheesh

• “The Static and Fatigue Response of Metal Laminate and Hybrid Fibre-Metal Laminate Doublers Joints Under Tension Loading”, paper presented and secured FIRST position in Fomra Quest, 2014

• "Effect of Exhaust Gas Recirculation on the Exhaust Gas Temperature (Expansion of EGR area with Venturi EGR system)", paper presented and secured FIRST position in MechQuake, 2012

• “Optical Transesterification For Biodiesel Production from Palm Oil and Coconut Oil as Lubricant”, paper presented in, 2012

• “Powder Metallurgy”, paper presented in Mechnium’11, 2011

CV

Dynamic and Professional Sales Man,
based in West Germany
and with international experience in the world of Heat Treatment
is looking for new challenges

Contact : heat-treating@metalspain.com

A Mechanical Engineer specialized in Industrial & Manufacturing Engineering with 1+ years of working Experience in Utilities and Projects at a Fortune 500 Company. Proven process optimization skills with the successful implementation of Lean Maintenance Program, strong negotiating skills with a rich experience in Project Lead and Technical Procurement with professional knowledge of Maintenance Planning, Machinery Installation and HVAC maintenance

KEY SKILLS
-Plant Maintenance
-Project Engineering & Management
-OnSite Management of Contractors
-Maintenance & Overhauling
-Risk Assessment & Safety Management
-Permit to Work Management
-HVAC Design for

Enclosed is my CV that includes the above achievements and outlines several others that will be of interest to you. I would appreciate the opportunity to discuss your requirements further, and to establish my skills as a match for them.

Please feel free to call me at my mobile number or email me. I look forward to our meeting.

Thank you for your time and consideration

Muhammad Faizan
+971 56 9607853

Amal Chakravarty Highly skilled Network Engineer with 5 years Experience

Thomson Mathunni
MBA with 8 Years Experience (In UAE) Looking for An Opening in Middle / Senior Management Position

I am Dinesh Elangovan currently I working as an Executive Engineer – MEP for Chennai Radha Engineering works (NTCPL) and Having around 2+ years of Experiences in the QA/QC in INDIA, Chennai NTCPL and L& T, Cuddalor and handled several projects which includes commercial complex, high raised building, ware house, gallery and also having valid Indian Driving license. CV

Mansoor Hassan Resume for the post of operations executive or in customer service department

I have recently completed Master of Business Administration (HR & Finance) in MEASI Institute of management at University of Madras. In MBA I had done projects related to Performance Appraisal and Grievance Handling mechanism. I have done my bachelors degree of B.com (computer applications) at University of Madras CV

S.SYED ALI FATHIMA
s_syedalifathima@ymail.com
0524909656

Having 3 years of experience as Mechanical engineer. Currently i am pursuing for a better career which will be a stepping stone for my next level in Mechanical field. Seeking middle level assignments in the domain of Mechanical sales, Production, Maintenance and project engineer with an organization of repute, preferably in Mechanical, Air conditioning, Automotive and Manufacturing industry.

I have completed B.TECH in MECHANICAL ENGINEERING from UNIVERSITY OF CALICUT. I am looking for a mid-career.

Prasanth Unnikrishnan CV

Prijilal Ramachandran APPLICATION FOR THE POST OF ACCOUNTANT

MEHWISH SHAHID
+971-50-1244597

HR & Project Coordinator Officer with proven expertise in policies and procedures, recruiting and hiring practices, payroll processing, personnel development, retention approaches, legal compliance issues, managerial support, labor relations and negotiations. Background includes: turnover reduction, development and implementation of employee performance management. An strong communicator and HR trainer. CV

With over 7+ years’ experience in Finance & Accounts Management & Control, I am a Senior Finance professional seeking challenging assignments to excel in the field of Finance. Adept at Core
Finance operations like Accounting & Finance Management, Budget Management, Financial & Strategic Planning, Finance Reporting, ensuring policies & procedures and relationship management

My professional experience encompasses a wide range of responsibilities. M/s A.J. Precision & Automation (P) Ltd, Noida In India and Soho Ltd, Ghaziabad and also various Audit Experience
with may Article Ship under the Register and Reputed Chartered Accountant In India. CV

RAVISHANKER KUMAR RAI

Mobile – 00971 55 8464166
E-Mail caravirai@rediffmail.com

Ambily John CV

Actualmente trabajo en petróleos de Venezuela en el departamento de operaciones de producción como operador, también trabaje en el departamento de tratamiento químico de crudo y agua y soy en instrumentación industrial con experiencia en la industria petrolera de 10 años. Quiero aportar mis conocimientos adquiridos internacionalmente.
ver CV

Buscamos tecnico-comercial, preferible Ingeniero, con conocimiento en fundicion ferrica, especialmente en hornos, para desarrollo de Proyecto en hornos de induccion a nivel Europa y America.
Interesados enviar CV a hormesa@hormesa.com

Solicito Ingeniero de ventas para Hornos Industriales y equipo auxiliar, en el area de Queretaro, Mexico ventas@carrasco.com.mx

Director of Remelt & Casting - Aluminum Industry 030513DOC
I am seeking BS Degreed professionals that have plant management experience
within aluminum smelter, remelt, and ingot casting type operations that have DC or
EM casting experience that is ready for a Director of Remelt & Casting position with a
growing aluminum industry client of ours in the Southern USA. This is a plant
management type role over 250+ personnel with management direct reports. Prior
engineering or continuous improvement leadership experience within metals industry
plants is highly preferred. My client is targeting the $120K to $150K base salary
range plus excellent benefits and flexible full relocation package. If this describes you
or any colleagues you know that may be interested please contact me. Jamie Behm
FPC of Cincinnati Executive Search Director Primary Metals Manufacturing
513.943.9095 x100 fpccin@one.net www.linkedin.com/in/jamiebehm
www.fpcnational.com/cincinnati

Requirements:
Bachelor's Degree in Engineering (Industrial, Electrical, Mechanical)
3-5 years of experience in a heavy industry or manufacturing environment
Previous Supervisory experience_
Apply online at: www.gerdau.com\longsteel

---

Senior Heat Treatment Engineer, Mexico
Vacante para especialista en Tratamientos Técnicos
Senior Heat Treatment Engineer | Ofertas de empleo en Mexico | Hays - Recruiting experts worldwide hays.com.mx mexico@hays.com.mx

---

Contratamos Tecnólogo ou Engenheiro para São Bernardo do Campo
- Escolaridade: Tecnologia ou Engenharia, dos Cursos Elétrica, Eletrônica, Mecatrônica, Mecânica ou Automobilística._- Atuará no departamento de Protótipos e Engenharia Experimental;_- Será responsável por Montar e testar sistemas elétricos em bancadas de teste, componentes e em veículos completos; Realizará desmontagens e montagens em componentes mecânicos adjacentes; Execução dos testes, instrumentação de objetos de testes, calibração de instrumentos de medição, elaboração de relatórios técnicos._- Proficiência no mínimo intermediária do idioma Inglês._- Experiência em laboratório ou em oficinas de protótipos e testes de desenvolvimento do produto._- Desejável conhecimento de Sistemas de medição, aquisição e análise de dados._Encaminhar currículo para rh@ivm-automotive.com.br até 09/03/2013, mencionando a pretensão salarial

---

We are looking for a well experienced Plant Manager for our Melt Shop, consisting of a Scrap Yard, 60 EAF, LMF and 3 Strand Billet Caster. Although the overall purpose of this position is to contribute to the business success by realizing the monthly plan for the Melt Shop as well as sustaining the condition and productive capacity of the assets, this position will play a very important role in the growth and transformation objectives of the Al Anmaa Company.
If you are interested to gain a career enriching experience and to be part of our dynamic journey of transformation and continuous improvement, then please send your CV to reinette.f@alanmaa.com.

Excellent opportunity for a Production Supervisor/ Routine Facilitator III at Gerdau's Wilton, IA mill. Relocation assistance provided.
Requirements include: Bachelors degree in Engineering (Industrial, Mechanical, or Electrical), combined with 5-7 years experience in a manufacturing or industrial environment. Melt Shop experience is a requirement. Responsible for providing leadership guidance by establishing a productive, high performing environment.

Gerdau is an equal opportunity/affirmative action employer, committed to diversifying its workforce. All applicants must be legally eligible to work in the country of hire without current or future sponsorship.

For more details & to apply: https://gerdau.greatjob.net/jobs/EntryServlet?job=IMQGA&media=YHW or email maureen.lund@gerdau.com.
Requisition #: 142333 gerdau.greatjob.net

Interessados enviar currículo para sheila.adecco@gmail.com

JEFE DE LABORATORIO METALURGICO Y QUÍMICO:
5 años mínimo en posición similar en empresa automotriz

ingles técnico de 70 a 80%

Preferentemente Ingeniero.

Conocimientos en GD&T, CMM con software Calypso , bancos de medición de las marcas Etamic, vantage, Detroit precisión, R&R , cgk, análisis de graficas estadísticas, interpretación de dibujos, correlación entre gages de piso y laboratorio, APQP, PPAP,MSA, estadística, Plan Control, AMEF, ISO TS . _Experiencia en elaborar ayudas visuales para controlar proceso, en administrar equipos de trabajo, en administración de programas d e mantenimiento de equipos de laboratorio y programas de calibración, selección de laboratorios externos ,impartir cursos internos._

ENVIAR CV A consultoria07@prodensa.com.mx; consultoria24@prodensa.com.mx; consultoria25@prodensa.com.mx; rsoto@prodensa.com.mx...GRACIAS

Estamos contratando: Program Controller exp.en estimación de costos./ Program Buyer exp. en lanzamiento de programas y/o proyectos. /Commodity Buyer plásticos y/o estampados.
Necesario experiencia en el sector automotriz. Lugar de Trabajo Santa Fé, D.F.
Interesados (as) enviar su CV en inglés indicando expectativas económicas a letylopezradilla@gmail.com

RHI are looking for Refractory Sales Managers for the US South and West Regions for our Environmental Energy and Chemical Group. Refractory product experience is desired.
As a Sales Account Manager, responsibility will include managing clients in assigned area and establish business with new clients. The Sales Account Manager will ensure that all accounts are serviced and that all opportunities are pursued and targets are accomplished. The Sales Account Manager will undertake any additional responsibilities within RHI as needed to maintain client service. This position requires a self-starter who thrives in an environment which requires critical thinking and a bias for action and results.You will be expected to grow existing sales and develop new accounts and submit quotes in pursuit of new business. The Sales Account Manager will be expected to abide by all RHI policies and customer safety requirements.__Knowledge/Experience/Skills Needed: __Bachelors degree in Ceramic Engineering, Materials Science or related technical discipline. _1 + years of experience with refractory products with contractors or in Refineries and/or Chemical plants desired but not essential Previous refractory sales experience a huge plus_Ability to travel within USA and strategically plan and execute on sales forecasts and business plans.Strong reasoning and decision-making skills with the ability to relate to customers at all levels within the operations.Negotiation and persuasiveness skills required. Ability to communicate clearly and effectively verbally and in writing.Self management ability._Benefits of position include medical, dental, vision, 401k, company paid life insurance, company vehicle allowance, competitive compensation structure and exciting sales incentive program._US Citizens preferred.

Braze Specialist/Metallurgical Engineer Position Available
Triumph Thermals Systems is in search of a qualified Braze Specialist/Metallurgical Engineer.__TRIUMPH THERMAL SYSTEMS! __Triumph Thermal Systems (TTS), located in Northwestern Ohio, is a leading supplier of heat transfer systems and components serving the aerospace industry. At TTS, our employees enjoy a great degree of freedom in decision-making, while benefiting from the guidance of an experienced management team. As a TTS employee, you'll be part of a tight-knit group of high-caliber professionals, each of whom plays a key role in our overall success. Bring your skills and expertise to our growing organization by joining us in the following role:__Brazing Specialist - Aerospace_Forest, Ohio__As Brazing Specialist, Consultant, and Project Leader, your responsibility will be to ensure the timely and efficient completion of detailed brazing-related engineering projects while meeting company cost and customer service objectives. You'll also lend your technical expertise to design planning, organizing, and conducting technical projects or phases of projects. To qualify, you'll need to have eight or more years of related experience in Vaccum Furnace Brazing, Salt Brazing, Heat-Treat and Parts Cleaning, preferably within the Aerospace/Aircraft industry. If selected, you'll have the opportunity to earn an annual bonus, based on financial performance, which can reach 8% of your annual salary.Due to our company's position as a key supplier to the US defense industry, all candidates must possess United States citizenship.__An Equal Opportunity Employer M/F/D/V_Job Requirements :_QUALIFICATIONS__Bachelors degree (BA) in Mechanical or Metallurgy engineering or related engineering field._Demonstrated ability to perform the essential functions of the job typically acquired through eight or more years of related experience. Aerospace/Aircraft experience preferred._· Comprehensive knowledge of Aluminum and Stainless Steel Alloy Metallurgy, Aluminum and Stainless Steel Alloy joining processes such as TIG welding and vacuum furnace/dip brazing, engineering theories, principles, industry practices, concepts, techniques, regulations, and policies.__· Thorough knowledge of lean manufacturing/production principles and techniques.__· Ability to define problems, collect data, establish facts, and draw valid conclusions.__· Basic understanding of sheet metal fabrication processes. Experience with heat exchangers is preferred.__· Ability to work with production employees on the plant floor and enlist cooperation.__· Ability to communicate effectively and make effective and persuasive presentations on complex topics to production floor employees, engineering and technical personnel, management and customers.__· Ability to respond to significant inquiries or complaints from customers, regulatory agencies, or members of the business community.__· Ability to effectively demonstrate team member competencies and participate in goal-setting, performance feedback, and self-development activities.__Offer Relocation : Yes_Shift/Hours : First Shift (Day)__Please Apply at:_https://triumphgroup.tms.hrdepartment.com/jobs/1224/Braze-Engineer-Mat-Proc-Sr-SpecForest-OH

Technical Sales Manager - Investment Castings - UK - £40K Starting Salary
Technical Sales Manager_Investment Castings_Kent - UK_Salary £35K-£40K_Company Car_Private Health Insurance_Pension Plan__The Company_My client is at the forefront of investment casting technologies. Founded over 40 years ago, they are proven market leaders, providing high performance technical materials for the Investment, Artisan and Jewellery Casters. They focus on value-added solutions in order to ensure their customer's expectations and requirements will be exceeded. __The Position_An exciting new position has arisen for a Technical Sales Manager._Responsibilities Include:_· Maintaining and increasing sales of your company's products, and reaching the targets and goals set for your area by identifying and sourcing new business by active selling and trialling_· Establishing, maintaining and servicing the needs of your existing high profile clients_· Monthly compiling and analysing of sales figures._· Collecting customer feedback and market research._· Helping in the identification of new products and markets__Candidate Attributes & Qualifications_· Technical Qualification e.g. BSc/BEng in Materials Technology or a Materials Science or any allied Quantitative degree._· Fluent in both written and spoken German._· An ability to instigate, identify and capitalise business opportunities whilst exploring all potential avenues for business. _· Experience in the Investment Casting Industry would be highly advantageous.

pbarwise@pooleresourcing.co.uk

Technical Sales Manager for Steel production Machinery
Technical Sales Manager for Steel production Machinery

Position: Technical Sales Manager

Department: Steel making plant

Location:
Italy

Candidates MUST have previous experience and proven track record in the sales of steel production plant

Purpose:
To ensure an increasing sales volume of new business in the area of Steel production Machinery (by efficiently managing, in accordance with the company policies, the projects/tenders as well as identifying new opportunities with existing and new customers.

Accountability and Responsibility:
The job holder is accountable and responsible for the quality, the consistency and timely execution of the activities performed and the compliance with the contract clauses.

Main activities will include, but not limited to:
· Maintain and develop high level contacts with main steel industry customers and organizations,
· Defining marketing strategy and participation to main events of the sector,
· Contract definition and elaboration of Technical and Commercial proposals in collaboration with the HQ and/or other offices throughout the world,
· Coordination for sales activities and sales follow-up by monitoring project progresses (with the PM),
· Ensure customer satisfaction and assistance by paying continuous visits and proactive attitude,
· Advising on potential remedial action vs. unexpected events,
· Timely reporting on the project progress/status, market information and visits to customers,
· Assist on procurement activities for the local portion such as search of suppliers, negotiation, follow up, etc,
· Ensure an efficient interface between the sales activity and all other relevant departments

Main interfaces:
· Customers and Aluminium business associations
· All relevant departments in Cooperation and technical/commercial depts., engineering, legal, finance, purchasing, shipping, etc

Qualifications, Experience & Competences:
The job holder must have:
· Engineering/Technical degree ­ mechanical, knowledge of hydraulics, electrical and automation preferred.
· At least 5 years of experience in sales/marketing of machinery associated with Aluminium production
· Strategic approach, flexibility, strong communicator, negotiation skills and CRM experience.
· Project management desirable

For further information or to apply, please contact me at melissa.blake@globalengineeringrecruitment.com

pbarwise@pooleresourcing.co.uk

Position: Technical Sales Manager

Department: Steel making plant

Location:
Italy

Candidates MUST have previous experience and proven track record in the sales of steel production plant

Purpose:
To ensure an increasing sales volume of new business in the area of Steel production Machinery (by efficiently managing, in accordance with the company policies, the projects/tenders as well as identifying new opportunities with existing and new customers.

Accountability and Responsibility:
The job holder is accountable and responsible for the quality, the consistency and timely execution of the activities performed and the compliance with the contract clauses.

Main activities will include, but not limited to:
· Maintain and develop high level contacts with main steel industry customers and organizations,
· Defining marketing strategy and participation to main events of the sector,
· Contract definition and elaboration of Technical and Commercial proposals in collaboration with the HQ and/or other offices throughout the world,
· Coordination for sales activities and sales follow-up by monitoring project progresses (with the PM),
· Ensure customer satisfaction and assistance by paying continuous visits and proactive attitude,
· Advising on potential remedial action vs. unexpected events,
· Timely reporting on the project progress/status, market information and visits to customers,
· Assist on procurement activities for the local portion such as search of suppliers, negotiation, follow up, etc,
· Ensure an efficient interface between the sales activity and all other relevant departments

Main interfaces:
· Customers and Aluminium business associations
· All relevant departments in Cooperation and technical/commercial depts., engineering, legal, finance, purchasing, shipping, etc

Qualifications, Experience & Competences:
The job holder must have:
· Engineering/Technical degree ­ mechanical, knowledge of hydraulics, electrical and automation preferred.
· At least 5 years of experience in sales/marketing of machinery associated with Aluminium production
· Strategic approach, flexibility, strong communicator, negotiation skills and CRM experience.
· Project management desirable

For further information or to apply, please contact me at melissa.blake@globalengineeringrecruitment.com

Please email me at jone@ispards.com for more details on this opportunity.
Regards,
JON ETHIER (Search Consultant (International Search Partners
Visit us at: www.ispards.com ((619) 828-1038 DIRECT
Heat Treating Services, Equipment, and Materials

Enviar cv para sheila.silva@adecco.com com assunto Paint Shop

ENGENHEIRO DE PRODUTO JR. (DESIGN) - MULTINACIONAL AUTOMOTIVA / JUNDIAÍ aline.schenkel@br.behrgroup.com

Formação em engenharia Mecânica ou Mecatrônica.Conhecimentos Técnicos e aplicação do produto; característica do processo e produto; normas e ferramentas da qualidade ISO TS16949; DFMEA; normas técnicas internacionais.CAD Catia V5 e UG; sistemas EDM/GTA/ECR/SAP.Conhecimentos em GD&T (tolerâncias forma e posição, desenho técnico).Inglês Avançado.Disponibilidade para atuar em Jundiaí / SP.
Projetar produtos e componentes seguindo guidelines e normas de produto; Coordenar realização de simulações e cálculos numéricos (estruturais e de processo); Responsável pela inserção dos modelos 2D/3D e dados técnicos de produtos em sistema;Participar na definição das instruções e metodologias de trabalho para desenvolvimento de Produtos (fluxo, sistemas de codificação, dados do SAP). Grupos multifuncionais.

Engenheiro Mecânico (Pesquisa e Desenvolvimento do Produto)

Particularmente, estou buscando Engenheiro Mecânico (Pesquisa e Desenvolvimento do Produto) para empresa multinacional italiana, líder do mercado agrícola europeu.

Acompanhando o crescimento do negócio, a empresa está construindo uma nova fábrica localizada em Itupeva, que estará produzindo e vendendo eixos, suspensões para a indústria agrícola e automotiva.

A posição se reportara ao Diretor Geral ­ R&D Manager HQ (matriz).

Responsabilidades:
· Pesquisa, desenvolvimento e design de produtos da empresa (eixos, suspensão mecânica e pneumática) para o mercado brasileiro
· Realiza estudos de viabilidade para verificar a capacidade e funcionalidade.
· Desenvolve novos conceitos desde o projeto inicial para liberação no mercado.
· Mantém a documentação detalhada em todas as fases de pesquisa e desenvolvimento.
· Suporte ao equipe de Vendas na fase de desenvolvimento com o cliente final.

Perfil do candidato:
· Formação em Engenharia Mecânica;
· De 1 a 2 anos de experiência.
· Inglês desejável.

Salário: R$ 4.000

Local de trabalho:

Itupeva, São Paulo

Por gentileza, se esta vaga for do seu interesse, estarei aguardando seu Curriculum Vitae em português , e se for possível, informações sobre seu último salário.

m.kurowska@conseabrasil.com.br

KINDLY SEND YOUR RESUME TO saumya.kapoor@v4solutions.in

A Nine RH Consultoria busca diversos perfis para grandes oportunidades nas maiores multinacionais do setor naval e onshore. Envie seu currículo para fazer parte nosso banco e participe dos nossos processos seletivos!

Interessados deverão encaminhar currículo com pretensão salarial para tatyane.lopes@ninerh.com.br, colocando no assunto o nome do cargo que deseja uma oportunidade.

Candidates must have lead (PM) or highly contributed (PML) into a full Program development from RFQ/Award to SOP + 6 months. Mexican or Spanish native language/culture with good English speaking skills preferred. Mechanisms background highly desired. The hiring manager is looking to move quick! Please call right away or email if you're interested. (248) 269-2265 or laura.daugherty@faurecia.com

GER Consultancy are currently looking to recruit for numerous positions globally within the steel industry.

Some of the vacancies we have available at present include:

Senior Process Engineer - Italy
Senior Field Operations Expert - Italy
Cost Estimator - Italy
Vice President Sales - Long Product Machinery - China
Vice President of Project Execution - China
Mechanical Design Engineer - Ukraine
Mechanical Design Engineer (extrusion) - UK
Technical Sales Manager - Long Product Machinery - US
Technical Sales Manager - Flat Product Machinery - US
Technical Sales Manager - Continuous Casting Machinery - US
Technical Sales Manager - Pelletizing
Site Managers - Flat products- Various Locations
Commissioning Managers - Flat Products - Various Locations
NDT Engineers - Vietnam
Process Technologists (Casters / Hot rolling) - Italy
Welding Engineers - Romania & Vietnam
Project Managers - Various Locations.

If you have experience within the steel making environment and would be interested in any of the above roles or to find out more about our current vacancies, please send a full CV to melissa.blake@gerconsultancy.com

Designation: General Manager Manufacturing. (70% Manufacturing and 30% Foundry)
Industry: Foundry.
Experience: 15+ Years.
Qualification: B.E (Mechanical) / DME.
Compensation: Best in the Industry.
Location: South Maharashtra.
Contact Details:
Contact Person - Heena Gadwale / Mail id - cvc.antal@gmail.com / heena.cvcpl@gmail.com

Calle Cid 3, 2° - E-28001 MADRID T: 91 576 56 09 magazine@metalspain.com